Need help?Do you have a question about the General Climate GU-S24HR and is the answer not in the manual?
General safety instructions to prevent injury and property damage during use.
Warnings and precautions specific to the installation process.
Warnings and precautions related to the operation and maintenance of the unit.
Cautions to ensure safe operation, prevent damage, and maintain performance.
Overview of indoor unit operations, controls, and modes like auto, sleep, and dehumidification.
Overview of outdoor unit components and functionalities like fan control, valve operation, and protection.
Technical drawings and measurements for the indoor unit.
Technical drawings and measurements for the outdoor unit.
Comprehensive table of electrical, capacity, and performance specifications by model.
Visual representation of the refrigerant path during cooling operations.
Visual representation of the refrigerant path during heat pump operations.
Defines the acceptable outdoor and indoor temperature ranges for cooling operation.
Defines the acceptable outdoor and indoor temperature ranges for heating operation.
Electrical schematic illustrating the internal components and their connections.
Detailed wiring diagrams for indoor and outdoor units, showing connections and components.
Torque specifications for pipe connections and guidelines for power cord selection.
Information on allowed pipe length, elevation differences, and initial refrigerant considerations.
Step-by-step guide for purging air from the piping and indoor unit.
Procedure for pumping down refrigerant for re-installation or servicing.
Steps for re-purging the system with refrigerant after maintenance or re-installation.
Procedure to balance refrigerant levels by adjusting 2-way and 3-way valves.
Process of evacuating the refrigeration system using a vacuum pump.
Procedure for charging the system with the correct amount of refrigerant.
Detailed capacity tables for cooling and heating of the GC/GU-S24HR model.
Detailed capacity tables for cooling and heating of the GC/GU-S30HR model.
Detailed capacity data for cooling and heating of the GC/GU-S36HR model.
Details on operating conditions, voltage, frequency, and symbols used in the manual.
Overview of functions, protection, fan-only, and cooling mode operations.
Explains dehumidifying and heating modes, including fan actions and protections.
Explains the conditions and actions for defrosting mode during heating.
Covers auto, force cooling, sleep mode, and auto-restart functions.
Details the auto mode selection process based on temperature differences.
A table listing key operational parameters for each model (GC/GU-S24HR, S30HR, S36HR).
Explanation of indicator lights on the display board and their operational meanings.
Troubleshooting table for cooling mode failures and indicator lamp status.
Troubleshooting table for heat pump mode failures and indicator lamp status.
Flowchart for diagnosing issues when the air conditioner is not operating or showing indicators.
Troubleshooting for specific issues like resetting, lamp flashes, and timer errors.
Addresses additional failure scenarios involving operation and timer lamp flashes.
A table listing temperature sensor resistance values across a range of temperatures.
General| Refrigerant Type | R410A |
|---|---|
| Type | Split System |
| Power Consumption (Heating) | 2200 W |
| Power Supply | 220-240V, 50Hz |
| Operating Temperature (Cooling) | 18°C to 43°C |
| Power Consumption (Cooling) | 2200 W |
To Next Page