Need help?Do you have a question about the General Climate GU-S36HR and is the answer not in the manual?
General safety instructions to prevent injury, property damage, and incorrect operation.
Critical warnings and guidelines for safe installation of the unit.
Important safety instructions and precautions for operating the air conditioner.
Lists and describes various operational features of the indoor unit.
Lists and describes various operational features of the outdoor unit.
Provides physical dimensions (W, H, L) for the indoor unit.
Provides physical dimensions (W, H, D, L1-L3) for the outdoor unit.
Comprehensive technical data for all GC/GU-S models.
Illustrates the refrigerant flow for cooling-only operation.
Illustrates the refrigerant flow for heat pump operation.
Chart showing acceptable temperature ranges for cooling.
Chart showing acceptable temperature ranges for heating.
Detailed electronic circuit schematic for the air conditioner.
Electrical wiring diagrams for indoor/outdoor units (S24HR/S30HR).
Electrical wiring diagrams for the outdoor unit (S36HR).
Covers tools, torque, cable, and pipe connection guidelines.
Step-by-step guide to remove air from the refrigerant system.
Method for recovering refrigerant before re-installation.
Steps to purge air again after re-installation.
Method for balancing refrigerant charge in the system.
Process for creating a vacuum in the refrigerant system.
Steps for charging the system with the correct refrigerant amount.
Cooling and heating capacity data for the S24HR model.
Cooling and heating capacity data for the S30HR model.
Cooling and heating capacity data for the S36HR model.
Operating conditions for electronic control and meanings of symbols.
Lists operational features (Fan Only, Cooling) and protection mechanisms.
Describes dehumidifying and heating mode operations.
Further heating details, fan actions, and protections.
Explains the defrosting mode conditions and actions.
Covers auto mode selection, forced cooling, and sleep functions.
Functionality for resuming operation after power failure.
Lists operational parameters for different models.
Explanation of indicator lights on the unit's display board.
Lists failure symptoms and corresponding indicator states.
Flowchart for diagnosing issues when the unit is unresponsive.
Diagnosing frequent resetting during operation due to voltage issues.
Troubleshooting specific combinations of flashing lamps.
Table showing resistance values for temperature sensors at different temperatures.
General| Type | Split System |
|---|---|
| Cooling capacity | 36000 BTU/h |
| Refrigerant type | R410A |
| Air Flow (Indoor Unit) | 1200 m³/h |
| Power Supply | 220-240V/50Hz |
| Energy Efficiency Ratio (EER) | 3.0 |
| Operating Temperature (Cooling) | +18 to +43 °C |
To Next Page