General MC-100 User Manual

CLEANING
Clean and sanitize the chopper before using the first time. after each
use, and before grinding different types of food products. Follow
company, local and state health/sanitation codes.
WARNING: Set the power switch to OFF, and unplug the
chopper before cleaning or handling.
Do NOT use caustic or abrasive cleaners.
Do NOT spray cleaning materials or water toward the switch case,
reset button, or motor cooling opening
Cylinder Head Assembly
1. Loosen the ring collar by turning a quarter turn counter-clockwise.
2. Loosen the thumbscrew by turning three turns counter-clockwise.
3. Remove the cylinder head by pulling it forward.
4. Loosen the ring collar by turning three turns counter-clockwise.
5. Push the feedscrew shaft forward into the cylinder head.
5
DISASSEMB
LY FOR CLEANING
Remove the tray by lifting upward.

General MC-100 Specifications

General

Brand	General
Model	MC-100
Category	Meat Grinder
Language	English