EasyManua.ls Logo

General SM-HD

General SM-HD
17 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
LUBRICATION
To insure continued smooth operation of sliding parts use the oil supplied in the accessory
box or a light mineral oil as follows:
1) Apply about ten drops of oil to the platform shaft about once per month. (Fig. 32)
2)
Apply 2-3 drops of oil to the food pusher shaft and the knife cover rod after each washing.
(Fig. 33)
WEAR ADJUSTMENT
After several years of operation and many sharpenings of the knife, it may be necessary to have
the regulator plate adjusted closer to the knife. Contact the factory authorized service agency or
the factory if this service becomes necessary as this service must be performed by an authorized
technician.
11

Related product manuals