29
CARE AND MAINTENANCE
• Reflective surfaces such as glass may reflect the
beam, causing two beams to strike the detector
at the same time. This may create inaccurate
reference points.
• This is a precision measuring instrument
and should always be handled with care and
transported within the carry case provided.
• Whenever possible, store the instrument in a dry,
shady location.
• Calibration of the instrument is recommended:
every six months, if ongoing accurate levelling is
required, or an impact has occurred.
• The operator should check the accuracy of the
instrument before precision levelling is attempted.
Failure to do so may result in inaccurate
measurements.
• The supplied charger is specific to this product. Do
not purchase or use any other type of charger or
power adaptor.
• Clean the instrument with a dry, soft cloth after use
in dusty, damp or wet conditions before storing.
• Smudges and fingerprints may be removed with a
damp tissue or a soft, lint-free cloth.
To Next Page
Loading...
