EasyManuals Logo

Generic Trigger X User Manual

Generic Trigger X
29 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #16 background imageLoading...
Page #16 background image
Oil
When the oil indicator is on, please fill oil into the sump.
As the right picture shows with a little pull,
You can open the sump cap.
CAUTION
Only use the oil of you authorized Generic Dealer. Only use
the right 2-Stroke engine oil. CASTROL Power 1 Racing
Gear box oil lever and replace the gear oil
gear oil level
Before start the engine, please check the gear oil level.
When check the gear oil level ,let the motorcycle stand on
flat, oil lever should between maximum and minimum level,
add SF lever SAE 85W90 gear oil to the maximum level if
required.
CAUTION
IT is easier to drain the engine oil when the engine is warm.
1. First remove the cap of the oil hole.
2. Screw bolt under the engine to drain the old oil.
3. Kick the engine some times to drain the oil cleanly
4. Add the proper oilobserving the lever, to the
maximum lever.
5. Fix the cap.
6. Start the engineLet the engine rotate a few
minutes under idle conditions, then switch off the
engine.

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Generic Trigger X and is the answer not in the manual?

Generic Trigger X Specifications

General IconGeneral
BrandGeneric
ModelTrigger X
CategoryMotorcycle
LanguageEnglish

Related product manuals