Generic Trigger X User Manual

SPECIFICATION AND TECHNICAL PARAMETER
Measure and weight
Length: 2035mm
Width: 890mm
Height: 1230mm
Wheelbase: 1390mm
Weight: 111Kg
Engine
Type: single cylinder, two stroke, water cool
Engine number: QJ1E40MB-2
Cylinder diameter×a stroke: 40.25mm×39mm
Exhaust: 49.6CM3
Nominal exhaust: 50CM3
Maximum power: 1.39kW/5500min-1
Maximum N/M: 2.6Nm/3000min-1
Ignition mode: CDI
Compression ratio: 7.0:1
Starting mode: electric start and foot kick start
Transmission system
Clutch: wet-multi-layer mode, six gear mode
First gear transmission ratio: 36/12
Second gear transmission ratio: 33/16
Third gear transmission ratio: 29/19
Forth gear transmission ratio: 27/22
Fifth gear transmission ratio: 25/24
Sixth gear transmission ratio: 24/25
Basic decelerate ratio: 71/20
Final decelerate ratio: 55/11
Frame
Front shock absorber: direct acting、oil damping
Rear shock absorber: suspending、oil air damping
Front break: liquid break
Rear break: liquid break
SM:
Front tire specification: 100/80-17,225KPa
Rear tire specification: 130/80-17,225KPa
X
Front tire specification: 3.00-21 51P RIM 21 x 1.85
Rear tire specification: 4.10-18 59P RIM 18 x 2.50

Generic Trigger X Specifications

General

Brand	Generic
Model	Trigger X
Category	Motorcycle
Language	English