Genesis G6.1 User Manual

ver 1.3
10
1010
10
~ÄëçäìíÉ=ÑáÇÉäáíó
make the soundstage more forward. There is about a one and a half dB
range for this control.
2.4.2 Bass Control
The knobs in the middle of the amplifier plate on the back of the speaker
control the servo-controlled bass amplifier.
The knob in the middle marked
BASS GAIN controls the volume of
the built-in bass servo amplifier.
Begin with this control at the 12
o’clock position (marked 6 on the
scale). The knob on the right
marked LOW PASS controls how high
in the frequency range the woofer
will play. At the extreme low of
71Hz, the woofer will play up to 71Hz, and then begin rolling off, or
reducing its volume at 12dB per octave. The recommended beginning
position for this control is 105Hz.
The knob on the left marked LFE GAIN is used for home theatre
applications and will be addressed later in the Home Theater/ Multi-
Channel section.

Genesis G6.1 Specifications

Frequency and Sensitivity

frequency response	55Hz to 36kHz, ± 3dB
sensitivity	89 dB, 1 watt 1 meter

Power

min/max power (tube)	75/500 watts per side
min/max power (solid state)	100/1000 watts per side

Transducers

hf transducers	One 1” Circular Ribbon Tweeter
midrange transducers	One Genesis 5” titanium cone midrange
lf transducers	Two Genesis 6.5” aluminium cone

Impedance and Inputs

input impedance	4 ohms (Nominal)
inputs	High-level with 5-way binding posts
throughputs	High-level with 5-way binding posts

Weight and Dimensions

dimensions	H 14½ “ x W 20½” x D 12”
weight	38.5 lbs (17.5kg) per side