ver 1.3
6
66
6
~ÄëçäìíÉ=ÑáÇÉäáíó
If you have no choice but to use an
extension cord, make sure that it is a
heavy-duty version that is capable of
delivering the required current. If you
use a power conditioner, we
recommend that it is capable of
delivering at least 10 amps.
1.4 Connections
For most applications, the speakers
should be plugged directly into the
output your power amplifiers using
high quality speaker cables and the 5-
way binding posts. Switch the bass
inputs selector UP to “High Level”. If
you are also using the speakers in a
home theatre set-up, you should also
plug the “LFE” or “Subwoofer” output
from your home theatre processor into
the LFE IN of the speaker.
1.5 Adjustments
Don’t be too worried by all those knobs
on the back of the G6.1. Just set all
knobs to the 12 o’clock position. That
is a good place to start. The G6.1 will
sound great, straight out of the box,
set-up like this. As you play your
system for the next hundred hours or
so, the speakers will settle in and
break in.
Once you familiarize yourself with their
performance, putting a little bit of
additional effort in tuning the speakers properly into your system (which
includes the room) will give you greater long-term enjoyment and
benefits.
To Next Page
Loading...
Need help?
Frequency and Sensitivity
Power
Weight and Dimensions
