6-8 I Voice Recognition
9RLFH&RPPDQGV
Types of Commands
Voice recognition commands are classified as "Global Commands"
and "Local Commands".
1. Global Commands (
٫
): Commands that can be used immedi-
ately after activating voice recognition.
2. Local Commands (
٩
): Commands that can be used when a
multimedia, navigation, or Bluetooth call is running, or displayed
on the screen, after activating voice recognition.
Call Commands
* Check the following before using call commands :
1. Voice commands related to phone calls can be used after con-
necting
a Bluetooth device.
2. To call a person, for example “Call <John Smith>” whose name
is listed in Contacts, you must first download the Contacts
list. For details on downloading contacts, see “Part 3. Using
Bluetooth > Chapter 3. Bluetooth Phone > 3.6 Contacts”.
3. After downloading the Bluetooth contacts, it will take some time
to convert the Contacts into voice data during which time you
cannot make a call by name yet.
The time it takes to convert
voice data may vary depending on the number of Contacts
downloaded on the phone.
Command Operation
٫
Call
Displays downloaded Contacts, after this
you can make a call by saying the name.
٫
Call <Name>
You can directly call a person by <Name>
in the downloaded Contacts.
٫
Call <Name> on
Mobile
You can call a person directly <name> to
the number that is saved as “Mobile” in
the downloaded Contacts.
e.g.) Call “John Smith” on Mobile
٫
Call <Name> in
Office
You can call a person directly <name> to
the number that is saved as “Office” in the
downloaded Contacts.
e.g.) Call “John Smith” in Office
٫
Call <Name> at
Home
You can call a person directly <name> to
the number that is saved as “Home” in the
downloaded Contacts.
e.g.) Call “John Smith” at Home
٫
Call <Name> on
Other
You can call a person directly <name> to
the number that is saved as “Other” than
“Mobile, Home, or Office” in the down-
loaded Contacts.
e.g.) Call “John Smith” on Other
٫
Dial Number
Displays a screen where you can say a
phone number to dial.
٫
Dial <Phone #>
You can directly say the number to call.
e.g.) Dial 111 555 1234
٫
Redial
Directly calls at the number that you last
dialed.
٫
Call History
Displays your Call History, where you can
say the list number to make a call.
To Next Page
Loading...
