2-22 I AV
86%
Before Playing a USB MP3
Connect the USB device after turning on the engine. The USB
device may become damaged if it is already connected when the
ignition is turned on.
•
Files that are not standard format music/image files will not be
played.
•
For MP3/WMA/OGG files, only music files with compression
rates between 8Kbps ~ 320Kbps can be played.
•
Heed caution to static electricity when connecting/disconnecting
external USB devices.
•
Encoded MP3 Players will not be recognized when connected
as an external device.
•
When connecting an external USB device, the device may not
properly recognize the USB is in some states.
•
Only products formatted with byte/sectors under 64Kbyte will be
recognized.
•
This device recognizes USB devices formatted in FAT 12/16/32
file formats. This device does not recognize files in NTFS file for-
mat.
•
Some USB devices may not be supported due to compatibility
issues.
•
Take caution so that the USB connector does not come in con-
tact with body parts or objects.
•
Repeated connecting/disconnecting of USB devices within short
periods of time may result in product malfunction.
•
Make sure to connect/disconnect external USB devices with the
audio power turned off.
•
The amount of time required to recognize the external USB
device may differ depending on the type, size, or file formats
stored on the USB.
•
The use of USB devices for purposes other than playing music
and image files is prohibited.
•
Do not use the USB I/F to charge batteries or USB accessories
that generate heat. Such acts may lead to worsened perfor-
mance or damage to the device.
•
The device may not recognize the USB device if separately
purchased USB hubs and extension cables are being used.
Connect the USB directly with the multimedia terminal of the
vehicle.
•
When using mass storage USB devices with separate logical
drives, only files saved to the root drive can be played.
•
When application programs are installed to specific USBs, files
may not properly play.
To Next Page
Loading...
