Genesis G80 - Connecting an External Device

AUX I 2-37

$8;
Connecting an External Device
If an external device connector is con-
nected with the AUX terminal, then AUX
mode will automatically operate. Once the
connector is disconnected, the previous
mode will be restored.
•
AUX mode can be used only when an
external audio player has been con-
nected.
•
The AUX volume can also be controlled
separately through the connected
device.
NOTICE
• If only a cable is connected to the AUX without
an external device, the mode will be changed
to AUX, but noise may occur. When an
external device is not being used, remove the
connector jack.
• When the external device power is connected
to the power jack, playing the external device
may output noise. In such cases, disconnect
the power connection before use.