Quick Reference Guide I 30
GENESIS G90
29 I Quick Reference Guide
DRIVING
ELECTRONIC PARKING BRAKE (EPB)
Apply Brake
Stop the vehicle, then pull
up the EPB switch.The
Parking Brake warning
light comes on in the
cluster.
Release Brake
Press the EPB switch
while depressing the
brake pedal.
Automatic Brake Release
• When in Park (P): Depress the brake pedal and shift out of P to Reverse
(R) or Drive (D).
• When in Neutral (N): Depress the brake pedal and shift out of N to
Reverse (R) or Drive (D).
HIGHWAY DRIVING ASSIST (HDA) (if equipped)
Highway Driving Assist helps keep the
vehicle between lanes, maintain a distance
with the vehicle ahead, and automatically
adjusts the vehicle speed to the speed limit
while driving on the highway.
With the vehicle on, select or deselect 'Driver
Assistance → Driving Convenience' from the
Settings menu to set whether to use each
function.
- If Highway Driving Assist is selected, it
helps maintain the selected distance to the
vehicle ahead, maintains the set speed,
and helps center the vehicle in the lane.
NOTE: If the vehicle is
turned off then on again,
HDA maintains the last
setting.
Operation:
• Driving on the highway main road.
- Vehicle speed is under 120 mph (200 km/h).
• Press the Driving Assist button on the steering wheel.
- If entering the main road of highways while SCC and LFA is
operating, HDA will be automatically activated.
If HDA is operating, the indicator on the cluster will illuminate green.
LANE KEEPING ASSIST (LKA)
Lane Keeping Assist detects lane
markers on the road with a camera
and assists the driver’s steering to
help keep the vehicle between lanes.
LKA operates when the vehicle
speed is between 40 mph and 110
mph.
From the Settings menu to change the
Warning Volume to ‘High’, ‘Medium’, ‘Low’
or ‘Off’
Driver Assistance > Warning Volume or
Sound > Driver Assist Warning > Warning
Volume
• To turn on the LKA, Press and hold
the Lane Driving Assist button.
• To turn off the LKA, Press and hold
again.
NOTE: In some circumstances, LKA may not activate as intended.
Ex: blurred lane conditions, backlight, heavy fog, reflection of light due
to water on the road, sharp Bends in the road, etc.
LANE FOLLOWING ASSIST (LFA)
Lane Following Assist is designed to help detect lane markings and/or
vehicles on the road, and assists the driver's steering to help keep the
vehicle between lanes.
To activate LFA:
With the engine on, shortly press the Lane Driving Assist button located
on the steering wheel to turn on Lane Following Assist. The grey or
green
indicator light will illuminate on the cluster. Press the button
again to turn off the function.
ADAS WARNING
ALERT ADJUSTMENT
To Next Page
Loading...
