Genesis G90 2024 - Power Trunk; Smart Trunk

Quick Reference Guide I 10
09 I Quick Reference Guide
GENESIS G90
FEATURES AND CONTROLS
Opening Power Trunk
With the smart key in your possession, press
either the trunk open button
B
on the vehicle
or press and hold the Trunk Open/Close
button
A
on the smart key. The hazard
warning lights will blink twice, and the trunk
will open.
POWER TRUNK
Closing Power Trunk
With the smart key in your possession, when
the trunk is open, press either the trunk
close button
C
on the vehicle or press and
hold the Trunk Open/Close button
A
on the
smart key. The trunk will close.
Power Trunk from Instrument Panel
When the trunk is closed, press the power
trunk open/close button, power trunk will
open with a warning sound. While the trunk
is opening, press the button to stop power
trunk operation. When the trunk is opened,
press and hold the trunk open/close button
to close the power trunk. If you release the
button while the trunk is closing, power trunk
operation will stop with a warning sound for 5
seconds.
A
B
C
D
SMART TRUNK
Setup > Vehicle > Door > Scroll
down and Select 'Smart trunk'
How to Use Smart Trunk
The hands-free smart trunk system can be
opened automatically when the following
conditions are met:
The smart trunk option is enabled in the
Settings menu in the infotainment system
screen.
The smart trunk is activated and ready 15
seconds after all the doors are closed and
locked.
The smart trunk will open when the smart
key is detected in the area behind the
vehicle for 3 seconds.
UVC
UV-C STERILIZER SYSTEM
UVC
UVC
UVC
The rear seat console is equipped with an antibacterial sterilization system for
personal belongings.
1
UV-C sterilizer system button
2
UV-C LED
3
UV-C Indicator light (upper part of armrest touchscreen)
Using UV-C sterilizer system
Place the item in the UV-C storage box and turn it on. Within 10 minutes,
up to 99.9% of germs on the surface may be eliminated.
1. Open the UV-C storage box while the engine is running.
2. Press the button inside the storage box.
UV-C sterilizer system indicator light illuminates.
Antibacterial tray is ready to operate.
3. Place the item in the center inside the storage box and close the cover.
UV-C indicator light illuminates.
UV-C LED is turned on and sterilization begins.
After 10 minutes, the UV-C indicator light turns off as sterilization is
complete.
Press the UV-C sterilizer system button to turn off the function, after you
are finished using the system.
1
1
2
2
2
3