Genesis G90 2024 - Forward Collision-Avoidance Assist (Fca); Surround View Monitor (Svm)

Quick Reference Guide I 32
31 I Quick Reference Guide
GENESIS G90
DRIVING
REAR CROSS-TRAFFIC COLLISION-
AVOIDANCE ASSIST (RCCA)
Rear Cross-Traffic Collision-Avoidance
Assist is designed to help detect vehicles
approaching from the left and right side
while your vehicle is reversing.
2
3
1
BLIND-SPOT COLLISION-AVOIDANCE ASSIT (BCA)
Blind-Spot Collision-Avoidance Assist is
designed to help detect and monitor
approaching vehicles in the driver’s blind spot
area and warn the driver of a possible
collision with a warning message and audible
warning.
To turn on/off select or deselect
‘Driver Assistance → Blind-Spot Safety’
from the Settings menu to set whether to
use each function.
FORWARD COLLISION-AVOIDANCE ASSIST (FCA)
Forward Collision-Avoidance Assist is
designed to help detect and monitor the
vehicle ahead or help detect a pedestrian or
cyclist in the roadway and warn the driver that
a collision is imminent with a warning message
and warning and apply emergency braking.
A
: Wide-front view camera
B
,
C
: Wide-side view camera
(Below the side view mirror)
D
: Wide-rear view camera
1
Parking/View Monitor Button
2
View Button
3
Infotainment System Button
4
Home Button
When Shift the gear to R (Reverse), Surround View Monitor is turned on.
Press the Parking/View button
1
to turn on Surround View Monitor.
Press the button again to turn off the function when the gear is in D or N.
Using the view button
2
you may select top view, front view, side view
and 3D view.
The front view function will turn off under the following conditions:
• The gear is shifted to P (Park) or R (Reverse).
• The Parking/View button
1
or the infotainment system button
3
is
pressed.
• Vehicle speed is above 6 mph (10 km/h).
• The Home button
4
is pressed.
Surround View Monitor will assist
in parking by allowing the driver to
see around the vehicle.
SURROUND VIEW MONITOR (SVM)
A
B
C
D
2
4
3 3
1
Setting Forward Safety function
With the vehicle on, select or deselect ‘Driver
Assistance → Forward Safety’ from the Settings menu
to set whether to use each function. If ‘Active Assist’ is
selected, Forward Collision-Avoidance Assist will warn
the driver with a warning message, an audible warning
and steering wheel vibration depending on the collision
risk levels. Braking assist or steering assist (if equipped)
will be applied depending on the collision risk levels. If
‘Warning Only’ is selected, Forward Collision-
Avoidance Assist will warn the driver with a warning
message, an audible warning and steering wheel
vibration depending on the collision risk levels.