5
English
MITER SAW STAND
Operator’s Manual
SPECIFICATIONS
• Model #: ------------------- GMSS400W
• Loading Capacity: --------- 400 lbs
• Height Range: ------------- 32-1/4” ~ 39” (820 ~ 990mm)
• Length Range: ------------- 41-1/4”~ 110” (1050~ 2805mm)
• Net Weight: ---------------- 41.8 lbs
Includes: (2) Saw Mounting Brackets, (2) Material Supports and Mounting Fasteners
WARNING: To reduce the risk of injury, user must read and understand
this operator’s manual before operating this tool. Save this Manual for future
reference.
Toll-Free Help Line: 1-888-552-8665
WARNING: The Operation of any power tool can result in foreign
objects being thrown into your eyes, which can result in severe eye damage.
Before beginning tool operation, always wear safety goggles or safety glasses
with side shields and a full face shield when needed. We recommend Wide
Vision Safety Mask for use over eyeglasses or standard safety glasses with
side shields. Always wear eye protection which is marked to comply with ANSI
Z87.1.
Look for this symbol to point out important safety
precautions. It means attention!!! Your safety is
involved.
SAFETY RULES FOR MITER SAW STAND
WARNING: READ and understand all warnings, cautions and operating
instructions before using this equipment. Failure to follow all instructions listed below
may result in electric shock, fire and/or serious personal injury.
• Keep your work area clean and well lit. Cluttered benches and dark areas invite accidents.
• Keep bystanders, children, and visitors away while operating a tool. Distractions
can cause you to lose control.
• Dress properly. Do not wear loose clothing or jewelry. Keep your hair, clothing and gloves away from
moving parts. Loose clothes, jewelry or long hair can be caught in moving parts.
• Use safety equipment. Always wear eye protection. Safety equipment such as dust mask, non-skid
safety shoes, hard hat, or hearing protection for appropriate conditions will reduce personal injuries.
• Make sure all moving parts are free from interference.
• Check to make sure that all securing screws and knobs are tight before using
GMSS400W miter saw stand.
• Make sure the Miter Saw Stand GMSS400W is set up on firm, level ground in
a stable manner.
WEAR YOUR
FORESIGHT IS BETTER
THAN NO SIGHT
SAFETY GLASSES
To Next Page
Loading...
Need help?
General
