Genesis GTS10SC - Setup and Adjustments; Unpacking and Contents; Assembly and Adjustment

9
English
UNPACKING AND CONTENTS
IMPORTANT:Due to modern mass production techniques, it is unlikely the tool is
faulty or that a part is missing. If you find anything wrong, do not operate the tool until
the parts have been replaced or the fault has been rectified. Failure to do so could result
in serious personal injury.
CONTENTS IN PACKAGE (FIG 2)
Item Description QTY Item Description QTY
ASSEMBLY AND ADJUSTMENT
WARNING: DO NOT connect to power source until assembly is complete.
Failure to comply could result in accidental starting and serious personal injury.
WARNING:If any part is missing or damaged, do not attempt to assembly the
table saw, plug in the power source, or turn the switch on until the missing or damaged
part is obtained and it installed properly.
WORK STAND ASSEMBLY


 
3
14
13
12
11
10
9
7
1
2
5
15
4
16
8
6
FIG 2
17
  
  
   
  
  
 
  
 
 
 
 
 
  
  
   
  
  
