English
10" Table Saw
Operator’s Manual GTS10SC
4
• Storeidletooloutofreachofchildrenandotherinexperiencedpersons.
• Maintainpowertoolswithcare.
• Userecommendedaccessories.
• Keepcuttingtoolssharpandclean.
.
• Feedtheworkpieceinthecorrectdirectionandspeed.
• Neverleavethetoolrunningunattended,turnthepoweroff.
• Neverstartthepowertoolwhenanyrotatingcomponentisincontactwiththework
piece.
WARNING: USE OF THIS TOOL CAN GENERATE AND DISBURSE DUST OR
OTHER AIRBORNE PARTICLES, INCLUDING WOOD DUST, CRYSTALLINE SILICA DUST
AND ASBESTOS. Direct particles away from face and body. Always operate tool in a well-
ventilated area and provide for proper dust removal. Use dust collection system wherever
possible. Exposure to the dust may cause serious and permanent respiratory or other
injury, including silicosis (a serious lung disease), cancer, and death. Avoid breathing the
dust, and avoid prolonged contact with the dust. Allowing dust to get into your mouth or
eyes, or lay on your skin may promote absorption of harmful material. Always use properly
fitting NIOSH/OSHA approved respiratory protection appropriate for dust exposure, and
wash exposed areas with soap and water.
SERVICE
Have your power tool serviced by a qualified repair person using only identical
replacement parts.
• Serviceyourpowertoolperiodically.
WARNING:READ AND UNDERSTAND ALL WARNINGS, CAUTIONS AND
OPERATING INSTRUCTIONS BEFORE USING THIS EQUIPMENT. Failure to follow all
instructions listed below may result in electric shock, fire and/or serious personal injury.
SAVE THESE INSTRUCTIONS
EXTENSION CORDS
Grounded tools require a three wire extension cord.
Guidelines for Using Extension Cords