Need help?Do you have a question about the Genexis FiberTwist P3000B and is the answer not in the manual?
Details the status of the system LED, including ok, booting, error, and optical signal.
Explains the uplink LED states: link ok, no remote management, or no link.
Describes the TV LED indicators for TV ok, insufficient signal, or no TV.
Step-by-step instructions for safely removing the blind cover from the baseplate.
Details the status of the system LED, including ok, booting, error, and optical signal.
Explains the uplink LED states: link ok, no remote management, or no link.
Describes the TV LED indicators for TV ok, insufficient signal, or no TV.
Step-by-step instructions for safely removing the blind cover from the baseplate.
General| WAN | GPON |
|---|---|
| Wi-Fi Frequency Bands | 2.4 GHz and 5 GHz |
| VoIP | Yes |
| USB | 1 x USB 2.0 |
| Power Supply | 12V DC |
| LAN Ports | 4 x 10/100/1000 Mbps |
| Wi-Fi Standard | 802.11a/b/g/n/ac |
| Security Protocols | WPA2 |
To Next Page
