Need help?Do you have a question about the Genexis Pulse EX600 and is the answer not in the manual?
Instructions for setting up the Pulse EX600 as a broadband gateway.
Step-by-step guide to configure the Pulse EX600 as a wireless extender.
Step-by-step guide to configure the Pulse EX600 as a wired extender.
Explains the meaning of different LED colors and blinking patterns.
Diagnoses issues based on solid or blinking Status LED colors.
Addresses connectivity problems when the LED is blinking green.
Steps to restore the Pulse EX600 to its factory default settings.
Instructions for setting up the Pulse EX600 as a broadband gateway.
Step-by-step guide to configure the Pulse EX600 as a wireless extender.
Step-by-step guide to configure the Pulse EX600 as a wired extender.
Explains the meaning of different LED colors and blinking patterns.
Diagnoses issues based on solid or blinking Status LED colors.
Addresses connectivity problems when the LED is blinking green.
Steps to restore the Pulse EX600 to its factory default settings.
General| Type | Wireless Router |
|---|---|
| Frequency Bands | 2.4 GHz, 5 GHz |
| WAN Port | 1 x Gigabit Ethernet |
| USB Ports | 1 x USB 2.0 |
| Antenna Type | Internal |
| MU-MIMO | Yes |
| Wireless Standards | IEEE 802.11a/b/g/n/ac |
| Ethernet Ports | 4 x Gigabit Ethernet |
| Security | WPA, WPA2 |
To Next Page
