1. Safe-T-Beam® (STB) Non-Contact Reversing System:
t Places an infrared beam across the door opening.
t Only aects the DOWN travel of the door.
t Stops an open door from closing or reverses a door while in the down travel.
t Reversing system can be overridden with constant pressure on the wired wall console only.
t The door will stop and reverse to the full open position if beam is obstructed.
t Self-diagnostic LEDs on STBs and Powerhead alert to operational issues (See Locating Safe-T-Beam® (for multiple doors) &
Troubleshooting section in this manual for more information).
2. Contact Reversing System:
t Force control automatically reverses a closing door upon contact with an obstruction.
3. Manual Emergency Release pull handle & cord:
t Manually releases door from door opener. Used during a power failure or other emergency to allow manual opening and closing
of the door.
4. Automatic Bluetooth® LED Light Fixture:
t Lighting Fixture turns ON when door is activated and automatically turns OFF 4 minutes later.
t Can be activated/deactivated manually from the wall console.
5. Integrated Aladdin Connect™ :
t Available with select models, allows operation of the garage door opener with a secure mobile device application (app) from
Aladdin Connect™.
6. Wireless Wall Console:
t Wireless Wall Console operates door opener from inside garage with an open/close button.
t Manual light control and override.
t OPEN/CLOSE Delay button. Adds an operation delay. Press once for 10 seconds, twice for 20 seconds, three times for 30 seconds.
7. Intellicode® Encryption, Factory Programmed Remote(s) :
t An encryption system that enhances the security of the door opener by continuously changing the access code each time the
remote is used.
t Factory programmed remote control(s) included with this opener.
Not Shown- Battery Backup (Included on select models) :
t Mounts to bottom of opener and provides power for opener operation during power outages.
1
3
6
7
5
4
2
Vehicle
Compatible
STANDARD AND SAFETY FEATURES
1
1