To Next PageTo Next PageHow to troubleshoot a Genie 6170H-B Garage Door Opener that is not powered?
If your Genie Garage Door Opener isn't getting power, start by checking the breakers, fuses, and plugs. Also, inspect the wiring for any shorts.
Why is the beam not aligned on my Genie 6170H-B?
If the beam of your Genie Garage Door Opener is not aligned, check the source and sensor alignment. Also, check for any obstructions that may be interfering with the beam.
General| Type | Chain Drive |
|---|---|
| Horsepower | 1/2 HP |
| Battery Backup | No |
| Motor Type | AC |
| Remote Controls Included | 1 |
| Max Door Height | 7 ft |
| Drive System | Chain Drive |
| Voltage | 120V |
| Remote Control | Yes |
| Safety Sensors | Yes |
| Speed | 7 inches per second |
Infrared beam across door opening, stops/reverses door on obstruction.
Automatically reverses closing door upon contact with an obstruction.
Information on hazards associated with garage doors and openers.
Key safety points for moving doors, electrical shock, and spring tension.
Sets the door's fully closed position.
Sets the door's fully open position.
Sets force limits and tests the automatic reverse function.
Adjusts opener's force settings for specific door conditions.
Inspects garage door's balance, operation, and hardware.
Diagnoses and resolves opener operation and door movement problems.
Diagnoses issues related to the Safe-T-Beam® system and beam obstructions.
Troubleshoots intermittent door movement, stopping, or reversal issues.
