Genie GR-26J - Page 4

Operator's Manual Fourth Edition • First Printing
Introduction
2 GR-26J Part No. 1307950GT
Platform controls symbology and related
machine movement:
Jib boom function button
Mast function and turntable rotate
function button
Function switch for drive and boom
functions
Proportional control handle for
drive and boom functions
Thumb rocker switch for steer
function
Drive function enable button
Ground controls symbology and related
machine movement:
Jib boom up/down
Turntable rotate
Mast up/down
Mast down, Jib boom down
Mast Up, Jib boom Up
Key switch
Sequential functions and movement:
• Drive and steer.
Interlocked functions:
• Elevated drive speed.
• Elevated drive in an off-level condition.
• All platform and ground controls.
Limitations of use:
• The intended use of this machine is to lift
personnel, including tools, and materials to an
aerial work site.
• Do not elevate the platform unless the machine
is on firm level ground.