To Next PageTo Next Page
Need help?Do you have a question about the Genie GS-2032 and is the answer not in the manual?
General| Power Source | Electric |
|---|---|
| Battery Voltage | 24 V |
| Lift Capacity | 227 kg |
| Machine Length | 2.44 m |
| Lift Speed | 30 sec |
| Working Height | 26 ft (8.10 m) |
| Platform Height | 20 ft (6.10 m) |
| Drive Speed | 2.2 mph (3.5 km/h) |
Information for owners, users, and operators regarding machine usage and safety.
Instructions and warnings regarding machine misuse and operation requirements.
Information about electric shock risks and required safety clearances.
Warnings about flammable substances and refueling procedures.
Guidance on avoiding machine instability due to slope or load.
Warnings about potential crushing injuries from moving parts and scissor mechanisms.
Awareness of blind spots and obstructions when operating.
Safety advice regarding the operation of damaged or malfunctioning equipment.
Information on Personal Fall Protection Equipment (PFPE) requirements and usage.
Risks of electrical contact and required clearances from power lines.
Guidance on preventing tip-overs, including slope limits and platform capacity.
Safety measures for platform occupants, including guard rails and fall protection.
Awareness of blind spots, obstructions, and proper driving procedures.
Instructions for safe handling, charging, and maintenance of batteries.
Description of buttons and key switch for ground operations.
Description of controls for platform operations, including lift, drive, and steer functions.
Overview of operator's responsibility for pre-operation inspection and routine maintenance.
Importance of function tests to discover malfunctions before machine use.
Operator's role in determining workplace suitability for safe machine operation.
Operator's responsibility to follow safety rules and instructions for machine operation.
Procedures for emergency stop and lowering of the platform.
Steps for operating the machine from ground and platform controls.
Instructions for outrigger, steering, and driving functions.
Operating on slopes and understanding indicator codes/battery status.
Using safety arm, folding guardrails, and installing panel carriers.
Guidelines for safe battery charging and maintenance.
Guidelines for safely securing the machine to a transport vehicle.
Procedure for brake release and instructions for lifting with a forklift.
Information on proper rigging and lifting points for machine transport.
Procedure for checking and maintaining proper hydraulic oil level.
Procedure for checking batteries and overview of scheduled maintenance.
