Genie GS-2646 - Service Manual

Service Manual
Part No. 97385
Rev E10
February 2012
Serial Number Range
from GS3005A-76000
to GS3011A-109999
GS -1530/32
GS -1930/32
from GS3005B-76000
to GS3009B-98941
from GS3008C-101
to GS3011C-9999
GS -2032
GS -2632
GS -3232
GS -2046
GS -2646
GS -3246
from GS3205-75407
to GS3209-94602
from GS3209A-94603
to GS3212A-109999
from GS3205B-76000
to GS3209B-98941
from GS3208C-101
to GS3212C-9999
from GS4605-75438
to GS4609-95192
from GS4609A-95193
to GS4611A-109999
from GS4608C-101
to GS4612C-9999

Summary

Safety Rules

Danger

Warning about potential death or serious injury from hazards.

Do Not Perform Maintenance Unless

Conditions required before performing maintenance.

Specifications

Performance Specifications

Hydraulic Specifications

Scheduled Maintenance Procedures

Maintenance Schedule

Types of inspections and required checklists based on hours.

Checklist A Procedures

Procedures for inspecting manuals, decals, pre-operation, and function tests.

Checklist B Procedures

Procedures for inspecting batteries, electrical wiring, contactors, tires, etc.

Fault Codes

Fault Code Chart

Repair Procedures

Platform Controls

Scissor Components

Genie GS-2646 Specifications

General

Drive Speed - Raised	0.5 mph
Gradeability	25%
Power Source	Electric
Battery Voltage	24 V
Working Height	32 ft
Platform Height	26 ft
Lift Capacity	1, 000 lbs
Machine Width	46 in
Machine Length	8 ft
Drive Speed - Stowed	3.5 mph
Weight Capacity	1, 000 lbs
Stowed Length	8 ft
Stowed Width	46 in
Ground Clearance	4 in