Need help?Do you have a question about the Genie GS-2668 DC and is the answer not in the manual?
General| Machine Width | 6 ft 4 in (1.93 m) |
|---|---|
| Platform Width | 68 in |
| Machine Length | 144 in |
| Drive Speed - Lowered | 2.5 mph |
| Travel Speed | 2.5 mph |
| Power Source | DC Electric |
Machine is not electrically insulated; maintain safe distances from electrical current.
Do not exceed platform capacity or platform extension capacity.
Guard rail provides fall protection; maintain firm footing.
Be aware of blind spots, platform position, and overhead obstructions.
Avoid hydraulic leaks; do not contact components under covers.
Do not use the machine as a ground for welding.
Do not operate in hazardous or flammable locations.
Do not use a damaged or malfunctioning machine; conduct inspections.
Keep hands/limbs out of scissors; maintain safe distances.
Handle batteries with acid carefully, wear protective gear, avoid sparks.
Details the buttons and joystick on the platform control panel.
Details the controls located on the ground control panel.
Instructions for checking and maintaining the hydraulic oil level.
Procedures for checking battery condition, acid levels, and connections.
How to use the Emergency Stop button to halt all functions.
Procedures for lowering the platform using auxiliary systems.
Instructions for operating the machine from the ground controls.
Instructions for operating the machine from the platform controls.
Information on selecting drive modes, including incline operation.
Guidelines on personal fall protection equipment (PFPE) usage if required.
Steps to follow after completing operation, including parking and charging.
Steps to release and reset the machine's brakes for transport.
Procedures for safely lifting the machine using cranes or other equipment.
Methods for securely fastening the machine to a transport vehicle.
To Next Page
