To Next PageTo Next Page
Need help?Do you have a question about the Genie gS-1530/32 and is the answer not in the manual?
General| Brand | Genie |
|---|---|
| Model | gS-1530/32 |
| Category | Lifting Systems |
| Language | English |
Consequences of disobeying manual instructions: death or serious injury.
Conditions that must be met before operating the machine.
Failure to follow instructions leads to death or serious injury.
Operator's responsibilities for safe operation: avoid hazards, inspections, use as intended.
Mandatory requirements before operating the machine.
Avoid exceeding load capacity, driving on slopes, or operating in wind.
Do not sit/stand on rails. Maintain firm footing. Do not climb down when raised.
Keep limbs out of scissors. Maintain safe distances. Beware of crushing when grasping guard rail.
Core safety rules for operation, including inspections and training.
Contact with electric power lines causes death or injury. Maintain clearance.
Machine is not insulated. Maintain clearance from electrical power lines.
Do not exceed platform capacity or extension capacity. Check wind.
Raise platform only on firm, level surfaces. Avoid unstable or hazardous terrain.
Avoid strong winds. Do not increase platform area/load to maintain stability.
Avoid driving on uneven/unstable surfaces or hazards with platform raised.
Do not use damaged machines. Perform pre-operation inspection. Ensure legible decals.
List of checks required before operating the machine.
Operator's responsibility for visual inspection and routine maintenance.
Specific items to check: manuals, decals, leaks, components, structure, trays.
Steps and conditions for performing function tests before operation.
Purpose of function tests: discover malfunctions before service.
Tests for LED/LCD readouts, emergency stop, and key switch at ground controls.
Testing platform lift/lower functions, alarms, and pothole guards.
Tests for emergency stop, horn, drive/steer, and lift enable buttons.
Testing platform lift/lower functions from platform controls.
Testing the steer wheel function using the thumb rocker switch.
Testing drive function and brake response.
Testing tilt sensor by raising platform on an incline.
Testing automatic deployment and functionality of pothole guards.
Testing outrigger extension and retraction for GS-3232 models.
Testing the retraction of outriggers and restoration of functions.
Conditions and checks required for workplace inspection before operation.
Checklist of potential workplace hazards to be aware of and avoid.
Requirements before operating: learn manual, perform inspections, tests, and workplace check.
How to use the red Emergency Stop button to halt all functions.
Procedure for manually lowering the platform in an emergency.
Steps for operating the machine from the ground controls.
Procedure for extending outriggers, indicator lights, and level confirmation.
Procedure for retracting outriggers and restoring functions.
How to steer the machine using the thumb rocker switch.
How to drive the machine, control speed, and stop.
