To Next PageTo Next PageWhat to do if my Genie Lifting Systems machine does not move forward or back?
If your Genie Lifting System isn't moving forward or backward, make sure you're correctly seated in the driver's seat. Also, check that the parking brake is disengaged and the outriggers are lifted. Finally, inspect fuses F14 - F18 and replace them if needed.
Why does the starter not run on my Genie Lifting Systems?
If the starter on your Genie Lifting Systems isn't running, ensure the forward/reverse gear selector is in the neutral position. Also, check the battery; it may need to be recharged or replaced.
What to do if the starter runs, but the engine does not start on Genie Lifting Systems?
If the starter runs but the engine doesn't start on your Genie Lifting Systems, first check the engine start fuse (F1G for SX or F20 for EX) and replace it if necessary. Also, check the fuel level and refuel if needed. The fuel filter might be clogged, or the fuel hose might be empty. In these cases, refuel, then refer to engine operator handbook.
How to fix a Genie Lifting Systems dashboard that does not turn on?
If the dashboard on your Genie Lifting Systems isn't turning on, the battery might be down. You should check the battery condition. Also, a fuse in the engine compartment box might be blown, so check the main fuse and replace it if necessary.
Why is there no selection of the steering mode on my Genie Lifting Systems?
If there is no selection of the steering mode on your Genie Lifting Systems, check the fuse (F5 for SX or F24 for EX) and replace it if necessary.
General| Brand | Genie |
|---|---|
| Model | GTH-4017 SX |
| Category | Lifting Systems |
| Language | English |
Pictorial representations of hazards and their meanings for operator safety.
Precautions for operating a damaged or malfunctioning machine.
Hazards related to hydraulic leaks, ventilation, and boom operations.
Importance of not tampering with or removing safety devices.
Function of the moment limiting system for maintaining machine stability.
Safety considerations related to the job site features and conditions.
Precautions to take before operation or during maintenance activities.
Safety measures and precautions when operating with suspended loads.
Overview of the GTH-4013 SX model's primary features and components.
Operation of the joystick and levers for SX model telehandlers.
Operation of the joystick for EX model telehandlers.
Adjusting the operator's seat and proper seat belt fastening.
Step-by-step guide to starting and safely stopping the engine.
How to interpret and use load charts for safe lifting operations.
Understanding the load limiter system, indicators, and alarm codes.
Procedures for changing attachments with mechanical or hydraulic locking.
Routine maintenance tasks based on working hours and intervals.
Schedule and recommended types of oils for engine, axles, and hydraulics.
Procedures for checking load limiting system and other safety devices.
Identification of fuses and relays for SX models electrical system.
Capacities and recommended types of fluids for refueling.
Guide for identifying and resolving common machine problems.
Procedure for conducting overload tests with various attachments.
