To Next PageTo Next PageWhat to do if my Genie Lifting Systems machine does not move forward or back?
If your Genie Lifting System isn't moving forward or backward, make sure you're correctly seated in the driver's seat. Also, check that the parking brake is disengaged and the outriggers are lifted. Finally, inspect fuses F14 - F18 and replace them if needed.
Why does the starter not run on my Genie Lifting Systems?
If the starter on your Genie Lifting Systems isn't running, ensure the forward/reverse gear selector is in the neutral position. Also, check the battery; it may need to be recharged or replaced.
What to do if the starter runs, but the engine does not start on Genie Lifting Systems?
If the starter runs but the engine doesn't start on your Genie Lifting Systems, first check the engine start fuse (F1G for SX or F20 for EX) and replace it if necessary. Also, check the fuel level and refuel if needed. The fuel filter might be clogged, or the fuel hose might be empty. In these cases, refuel, then refer to engine operator handbook.
How to fix a Genie Lifting Systems dashboard that does not turn on?
If the dashboard on your Genie Lifting Systems isn't turning on, the battery might be down. You should check the battery condition. Also, a fuse in the engine compartment box might be blown, so check the main fuse and replace it if necessary.
Why is there no selection of the steering mode on my Genie Lifting Systems?
If there is no selection of the steering mode on your Genie Lifting Systems, check the fuse (F5 for SX or F24 for EX) and replace it if necessary.
General| Weight | 6, 610 lbs (2, 998 kg) |
|---|---|
| Power Source | Diesel |
| Max Lift Capacity | 400 kg |
| Maximum Lift Capacity | 400 kg |
| Maximum Platform Height | 13 m |
| Max Lift Height | 40 ft (12.19 m) |
| Maximum Working Height | 46 ft (14.02 m) |
| Capacity | 300 lbs (136 kg) |
