Need help?Do you have a question about the Genie Superlift SL-25 and is the answer not in the manual?
General| Brand | Genie |
|---|---|
| Model | Superlift SL-25 |
| Category | Lifting Systems |
| Language | English |
Details physical dimensions, load capacity, and weight for various Superlift models (SL-5 to SL-25).
Lists torque values for different bolt sizes and grades (SAE Grade 5 & 8) for general use.
Outlines daily, quarterly, and annual inspection frequencies and refers to corresponding maintenance tables (A, B, C).
Explains the structure and use of the inspection report for documenting machine checks and findings.
Details daily maintenance checks, including inspecting operator's manual, decals, and general machine condition.
Covers maintenance tasks like inspecting welds, cleaning columns, and lubricating the winch and barrel handler.
Outlines procedures for lubricating casters, inspecting mast wear, replacing winch parts, and checking safety brakes.
Diagnostic steps to identify and resolve issues when the mast fails to sequence correctly.
Troubleshooting guide for when the carriage doesn't raise, but the winch functions.
Steps to diagnose and fix problems related to the winch not operating.
Instructions for safely removing and disassembling the machine's base components.
Detailed procedures for disassembling and reassembling the mast sections and related parts.
Procedures for disassembling and assembling single-speed and two-speed winch mechanisms.
Information required for ordering replacement parts, including machine details and contact information.
Illustrations and part numbers for safety decals, notices, and paint references.
Exploded view and part list for components attached to the primary mast section.
Diagram and list of parts for the standard base assembly, including stabilizers and wheels.
To Next Page