Need help?Do you have a question about the Genie S-45 XC and is the answer not in the manual?
General| Horizontal Reach | 36 ft (10.97 m) |
|---|---|
| Weight | 13, 600 lb (6, 169 kg) |
| Gradeability | 30% |
| Machine Width | 8 ft 1 in (2.46 m) |
| Machine Length | 22 ft 4 in (6.81 m) |
| Fuel Type | Diesel |
| Platform Height | 45 ft |
| Power Source | Diesel |
| Turning Radius (Outside) | 14 ft (4.27 m) |
| Engine Type | Diesel |
| Hydraulic Tank Capacity | 17 gal (64 L) |
| Weight Capacity | 660 lb (300 kg) Unrestricted / 1, 000 lb (454 kg) Restricted |
| Lift Capacity | 660 lb (300 kg) / 1, 000 lb (454 kg) |
Highlights severe risks, including death or serious injury from improper use or non-compliance.
Specific instructions for safe operation, load capacity, and installation of the 4m platform.
Essential safety rules and preparation steps before commencing the 4m platform installation.
Detailed steps for removing the existing platform and installing the 4m platform, including safety notices.
Step-by-step instructions for accessing the Genie firmware site and updating the machine software.
Crucial procedure for selecting the correct 4m platform option in the machine settings to prevent tip-over hazards.
To Next Page
