Why is there no power to my Genius GHT-511?
If your Genius Home Cinema speakers have no power, it could be due to a broken power cable, a broken fuse, a faulty center PCBA, or a faulty power PCBA. You can try to resolve this by replacing the power cable, replacing the fuse, replacing the center PCBA, or replacing the power PCBA.
What to do if my Genius GHT-511 have no sound?
If your Genius Home Cinema speakers are not producing sound, the issue might be with a faulty signal cable, a defective AMP PCBA, or a broken RCA socket. To resolve this, try replacing the signal cable, replacing the AMP PCBA, or replacing the RCA socket.
How to fix noise coming from Genius GHT-511 Home Cinema speakers?
If you are experiencing noise issues with your Genius Home Cinema speakers, the problem could stem from a defective speaker, a faulty power PCBA, or a broken AMP PCBA. Try replacing the speaker, replacing the power PCBA, or replacing the AMP PCBA to resolve the issue.
What to do if button is not working on Genius GHT-511?
If a button on your Genius Home Cinema speakers isn't working, it could be due to a faulty button, a defective receiver, a broken cable, or a faulty power PCBA. Possible solutions include replacing the button, replacing the receiver, replacing the cable, or replacing the power PCBA.
Why is the display L.E.D. unlit on my Genius GHT-511?
If the display L.E.D. on your Genius Home Cinema speakers is unlit, it could be due to a broken or faulty L.E.D., a defective MPU, or a broken cable. You can attempt to fix this by replacing the L.E.D., replacing the MPU, or replacing the cable.
General| Frequency Response | 20 Hz - 20 kHz |
|---|---|
| Signal-to-Noise Ratio | 85 dB |
| Remote Control | Yes |
| Satellite Output Power | 15 W |
| Inputs | RCA |
| Satellite Speakers Power Output | 15W RMS x 2 |
| Power Supply | AC 220V |
| Dimensions (Satellite) | 90 x 160 x 100 mm |
To Next Page