Genius SP-S110 - No Power，Led （Indicator）Unlighted

Service Guide SP-S110
*Attention
Please follow the numbered sequence marked within parenthesis given in
individual
Flow chat in that this is the best-recommended sequence to rectify the problems.
1.2.1 No power，LED （indicator）unlighted
Problem
Analyze
and identify
the causes
Solutions
Version 1.0 Page 7 of 19
Dry-soldered secondary
wire of transformer
Defective o
r
damaged D1-D1
diode
Power switch poo
r
connected or defective
No power，LED （indicator）unlighted
Repair or replace
resolder or replace
Repair or replace
All manuals and user guides at all-guides.com