Genius SW-HF 5.1 6000 User Manual

Service Guide SW-HF 5.1 6000
6.1 Packing requirement for sending the PCB assembly by post
PCB assembly is a kind of sophisticated electronic circuit board.
Well packing will be required when sending them by post.
*Some sophisticated IC components are mounted on the PCB
assembly; hence it is necessary to pack each PCB assembly with a
separate static protecting bag, in order to avoid static electricity.
*Reliable external packing is also very important when sending the
PCB assembly by post, in that it would avoid unnecessarily lost or
damage.
6.2 Short of spare parts while repairing a speaker system
If you are short of spare parts when you have some speaker
systems waiting to be repaired, it would be recommended to take
the necessary parts from one
Speaker system, so that you may have the as many speaker
systems
Version 1.0 Page 25 of 36
Cha
p
ter 6. Im
p
ortant Notes

Genius SW-HF 5.1 6000 Specifications

General

Brand	Genius
Model	SW-HF 5.1 6000
Category	Speaker System
Language	English