Genius Wireless TwinTouch Optical Office User Manual

Hardware Installation
1. You can connect the receiver to a USB port of a PC.
2. Install two AA rechargeable batteries in the mouse and two AA rechargeable
batteries in the keyboard.
3. Turn on your computer.
4. The channel buttons are factory preset. If your keyboard/mouse does not work,
then follow the next step.
5. After you open Windows, to set the ID channel setting, please press the button
on the receiver first (RB) and press the button under the mouse (MB) within six
seconds. Now press the receiver button again and the button under the keyboard
(KB) within six seconds. So you press RB, MB, then the RB, KB to set the chan-
nel setting.
Important: You can use the battery charger receiver to recharge two AA or two
AAA rechargeable batteries each time when you use the PC. Plug the battery
charger receiver USB connector into the PC directly and remember do not put the
batteries in the wrong direction, use the same types of batteries, and do not
recharge via the USB hub, that will make your receiver, main-board and hub burn
or become non-usable easily. Also, keep all drinks away! If any spill occurs on the
receiver, unplug the USB connector first and clean the receiver immediately. Please
remove the batteries if you do not use this device for at least two weeks.
Warning: (Troubleshooting)
1. Please do not use Wireless TwinTouch Optical Office on a desk which is made
of glass, mirror, iron, or black velvet. Also, a flat surface is necessary or the Op
-
tical Sensor will error easily. When you use Wireless TwinTouch Optical Office
on a desk that is made of metal, try using a pad or reduce the receiving distance.
2. Before the first installation is completed (channel setting ready), the keyboard
will not work in DOS. If your USB keyboard does not work in BIOS, DOS or
Windows, then use another PS2 keyboard to make the USB controller (USB
function) and USB legacy (USB keyboard) “On” in the BIOS setup. This may
occur with older BIOS versions. Then unplug the PS/2 keyboard and plug in
your USB keyboard and everything should be working properly.
3. The Wireless TwinTouch Optical Office channel provides 256 ID-codes, and it
automatically selects the ID # for your keyboard and mouse. You can only set up
one Wireless TwinTouch Optical Office at a time. But if you have additional
1
ENGLISH

Genius Wireless TwinTouch Optical Office Specifications

General

Brand	Genius
Model	Wireless TwinTouch Optical Office
Category	Computer Accessories
Language	English

Summary

Hardware Installation

Initial Setup and Connection

Connect receiver, install batteries, and set ID channels for keyboard and mouse.

Battery Charger Usage Guidelines

Information on using the battery charger receiver with PC and precautions.

Troubleshooting and Warnings

Important warnings and troubleshooting steps for surface compatibility, BIOS, and device ID.

Usage and Software Installation

Battery Replacement and Placement Tips

Guidance on replacing batteries and optimal placement for wireless performance.

Software Installation Process

Steps to install the necessary software from the setup disk.

Factory Settings and Button Assignments

Details on default mouse settings and how to assign functions to buttons.

Keyboard Functions and Software Features

Keyboard Button Assignments

List of functions assigned to keyboard keys and the scroll wheel.

MouseMate Software Features Overview

Overview of features like Browsing Speed and Direction for enhanced navigation.

Advanced Features and Customization

MouseMate Feature Details

Detailed descriptions of features like Button Find, Loop, Mouse Speed, and Swap Left/Right.

Office and Genius Modes

Explanation of Office Mode and Genius Mode for enhanced application support.

EasyJump Functionality

Information on EasyJump modes, usage, and assigning functions via Frisbee.

Programmable Functions

Mouse Control Panel and Panning

Accessing mouse properties and using the panning function for documents.

Application Launch and Editing Functions

Functions to launch Word, Excel, PowerPoint, and perform editing operations.

Email and Internet Browser Integration

Functions for launching email clients and internet browsers, plus email management.

Internet Navigation and Media Control

Web Page Navigation

Functions to go back, forward, and navigate between web pages.

Media Player Control

Controls for playing, pausing, and stopping media players.

EasyJump Options and Modes

Switching between EasyJump modes and selecting functions from options.

Software Management

Application Switching and Zoom

Switching between applications and using zoom functions for documents.

Software Installation and Uninstallation

Instructions on how to install, uninstall, customize, and close the software.