Genmitsu 4040-PRO MAX - Page 23

21
Mechanical Installation
STEP 9 Tool Disassembly and Installation
Wrench (10mm, 17mm)
What you need:
1. Use the 10mm wrench to hold the router in place and the 17mm wrench to unscrew the collet nut on the 710W router.
2. Push the collet into the collet nut toward the arrow until a click is heard, indicating that the collet is in place.
Carving Router Bits Set
10mm Wrench
(Holding)
17mm Wrench
17mm Wrench
Tighten
Loosen
10mm Wrench
(Holding)