Error! Use the Home tab to apply 标题 1 to the text that you
want to appear here.
FA50 Operation Manual 33
select the item before measuring the reagent card, and click “Item
Set”, as shown in Fig. 5-7-4, click the item that needs to be tested
at present, and click “Confirm” to select the item to be tested.
Select QC2 and click “QC Reagent” button to start QC reagent test.
(Note: QC Reagent is fast measurement. Please insert the reagent
card that has been incubated to start the test)
Fig. 5-7-3
To Next Page
Loading...