Error! Use the Home tab to apply 标题 1 to the text that you
want to appear here.
40 FA50 Operation Manual
5.8.1 System Set
Click “Setup” button under the main interface. After entering the
setup menu, the default interface is the system set interface, as
shown in Fig.5-8-1. The interface is divided into Basic Set,
Communication, and Time Setting.
5.8.1.1Standby
Click “Standby” drop-down box, as shown in Fig. 5-8-2. The
standby setting time is 15 Min, 30 Min, and 60 Min. When the
standby time is set to 15 Min, the instrument is not operated, the
instrument will enter standby mode after 15 minutes.
Fig. 5-8-2
To Next Page
Loading...