Error! Use the Home tab to apply 标题 1 to the text that you
want to appear here.
FA50 Operation Manual 41
5.8.1.2Print
Click the “Print” drop-down box, as shown in Fig. 5-8-3. The print
settings are divided into Auto printing and Manual printing. When
the setting status is Auto, when the sample measurement and QC
reagent measurement, after each test is finished, real-time printing
will be performed. If the print setting status is Manual, real-time
printing will not be performed during sample measurement and QC
reagent measurement.
Fig. 5-8-3
To Next Page
Loading...