GeoVision GV-Compact DVR V2 User Manual

84
The GV-Compact DVR V2 can connect up to 4 output devices, such as alarms. Select Enable
to start the output device. Choose the output signal that mostly suits the device you are using:
N/O (Open Circuit), N/C (Grounded Circuit), N/O Toggle, N/C Toggle, N/O Pulse and N/C
Pulse. Set the pulse duration for the pulse mode.
You can also choose to activate the configured output device automatically under these
conditions: video lost, disk write error and hard disk full.
Figure 6-8

GeoVision GV-Compact DVR V2 Specifications

General

Brand	GeoVision
Model	GV-Compact DVR V2
Category	DVR
Language	English