Introduction
3
1
1.2 Supported GeoVision Products
GV-IP Devices Supported Version
GV-IP Camera All GV-IP Cameras with the latest firmware.
GV-VS11 V1.03 or later
GV-VS12 V1.07 or later
GV-VS14 V1.01 or later
GV-VS2400/2420 V1.00 or later
GV-VS2800/2820 V1.00 or later
GV-Video Server
GV-VS21600 V1.00 or later
GV-SNVR0400F V1.10 or later
GV-SNVR0411 V2.10 or later
GV-SNVR0811 V2.40 or later
GV-SNVR1600 V1.10 or later
GV-NVR System
GV-SNVR1611 V1.00 or later
GV-Software Supported Version
GV-Recording Server V1.2.4.0 or later
GV-DVR / NVR V8.5.9.0 or later
GV-VMS V14.10 or later
Note:
1. For the NAS application, it is required to use GV-IP Cameras (firmware V3.00 or later),
GV-Target Cameras (firmware V1.02 or later), GV-EFD2101/EFD3101/EVD2100/
EVD3100 (firmware V1.00 or later).
2. Files recorded to GV-NAS Systems are stored in MPEG4 format and those recorded to
memory cards are stored in AVI format.
3. Remote playback from SD card is not supported for the following models: GV-ABL /
TBL Series, GV-ADR / TDR Series, GV-AVD / TVD Series, GV-EBD Series,
GV-QSD5730 / 5731-IR, GV-SD2322-IR / 2722-IR / 3732-IR.
4. Adjusting dome view of PTZ cameras by double-clicking on the live view is not
supported for those added via GV-VMS.
5. The Center Move function of GV-PTZ cameras is not supported for such added via
GV-Recording Server / SNVR / VMS.
6. The following features are not supported for GV-SNVR:
A. Instant Playback.
B. Audio not supported for recording backup
To Next Page
Loading...
Need help?
General
