9F, No. 246, Sec. 1, Neihu Rd., Neihu District, Taipei, Taiwan
Tel: +886-2-8797-8376 Fax: +886-2-8797-8335
support@geovision.com.tw
http://www.geovision.com.tw
1. Copy the firmware file to the root folder of a USB storage device or a
SD card.
2. Connect the USB drive or SD card to the GV-IP Decoder Box /
GV-Pad.
3. On the setup menu, select and press OK. This window appears.
4. In the Firmware Update field, select USB or SD storage that stores
the firmware file.
5. Press OK. The firmware upgrade runs automatically, and the GV-IP
Decoder Box / GV-Pad will restart after the firmware upgrade is
completed.
● the storage device (USB drive or SD card) contains one firmware
file only.
● the USB drive or SD card has at least 100 MB of free space.
8
Pausing the Looped View
9
Upgrading the Firmware
You can pause the looped view at a single channel. To pause the looped
view, press the key. A loop sign with a cross will appear on the
top-right corner of the display channel. To resume to the looped view, press
the key again.
We will periodically release the updated firmware on the website. You may
choose to update firmware locally using a USB drive or SD card
To upgrade the firmware remotely through GV IP Device Utility, see 3.6.2
Upgarding Firmware through GV IP Device Utility in GV-IP Decoder Box
and GV-Pad User’s Manual on software DVD.
Before you start, be sure:
To Previous Page
Loading...
