GeoVision GV-IP Decoder Box Quick Start Guide

1. Be sure your GV IP devices:
2. Select the icon and press OK. The GV IP devices under the
same LAN will appear on the Device List.
● are under same LAN with the GV-IP Decoder Box / GV-Pad.
● have the same ID and password set on the GV-IP Decoder Box /
GV-Pad for IP channel connection. For detail, see Configuring the
ID and Password, 4. Configuring the Basics, in the Quick Start
Guide.
● have the same VSS port with the NVR port of the GV-IP Decoder
Box / GV-Pad. The defualt value is 10000.
For logging in GV-IP Decoder Box / GV-Pad
5
Displaying Channels from GV IP Devices
Use the search feature on GV-IP Decoder Box / GV-Pad to display
channels of GV IP devices installed under the same LAN.
Note: The GV-IP Decoder Box / GV-Pad can decode a total of 64
channels from GeoVision and third-party IP devices.
1. On the main menu, select the icon and press OK. This window
appears.
For connecting GV IP devices
1. On the main menu, select the icon and press OK. This window
appears.
2. Type the ID and password and press OK to confirm. The maximum
number of characters is 15.
2. Type the ID and password and press OK to confirm. The maximum
number of characters is 14.
Configuring the ID and Password

GeoVision GV-IP Decoder Box Specifications

General

Brand	GeoVision
Model	GV-IP Decoder Box
Category	Network Hardware
Language	English