GeoVision GV Series How-To Guide

9
Ultra Bullet Camera
1. Keep the power and network cables (or PoE) connected to the camera.
2. Press and hold the default button.
3. Release the default button when the status LED blinks. This shall take about 8
seconds.
4. When the status LED fades, the process of loading default settings is completed and the
camera reboots automatically.

GeoVision GV Series Specifications

General

Series	GV Series
Category	Security Camera
IP Rating	IP66, IP67
Power Supply	PoE, 12V DC
Video Compression	H.264, H.265
Day/Night Mode	Yes
Network Interface	RJ45
Resolution	Varies by model (e.g., 1080p, 4K)
Lens	Varies by model (e.g., fixed, varifocal)
IR Distance	Varies by model (e.g., 30m, 50m)