Need help?Do you have a question about the GeoVision GV-UNP2500 and is the answer not in the manual?
General| Night Vision | Yes |
|---|---|
| Digital WDR | Yes |
| Video Compression | H.264, MJPEG |
| Vandal Resistance | IK10 |
| Lens Type | Vari-focal |
| Aperture | F/1.6 |
| Wide Dynamic Range | Yes |
| Maximum Frame Rate | 30 fps at 1920 x 1080 |
| Network Interface | 10/100 Ethernet |
| Power Supply | DC 12V, PoE (802.3af) |
| Operating Temperature | 50°C |
| Operating Conditions | Humidity 90% or less (non-condensing) |
| Weather Resistance | IP66 |
Details how to connect Box Cameras to network, power, and other peripherals.
Guides on how to install the Ultra Box Camera on walls or ceilings.
Details connecting the Ultra Box Camera to power, network, and peripherals.
Guides on how to install the Target Box Camera on walls or ceilings.
Details connecting the Target Box Camera to power, network, and peripherals.
Guides on installing the IR Arctic Box Camera outdoors.
Details connecting IR Arctic Box Cameras to power and network.
Guides on installing Mini Fixed Dome and Mini Fixed Rugged Dome.
Details connecting Mini Fixed Dome and Rugged Dome to power and network.
Guides on installing the Bullet Camera (Part I) on ceilings and walls.
Details connecting Bullet Camera (Part I) to power, network, and cables.
Guides on installing the Bullet Camera (Part II) on walls or ceilings.
Details connecting Bullet Camera (Part II) to power.
Guides on installing the Bullet Camera (Part III).
Details wire definitions and power connection for Bullet Camera (Part III).
Guides on installing the Ultra Bullet Camera on ceilings or walls.
Guides on connecting power to the Ultra Bullet Camera.
Guides on installing Target Bullet Camera (Part I) on ceilings or walls.
Guides on connecting power to the Target Bullet Camera (Part I).
Guides on installing Target Bullet Camera (Part II).
Details power connection for Target Bullet Camera (Part II).
Guides on installing Vandal Proof IP Dome (Part I) using hard-ceiling and in-ceiling mounts.
Details wire definition and power cable connection for Vandal Proof IP Dome.
Guides on installing Vandal Proof IP Dome (Part II) on ceilings.
Details power cable connection for Vandal Proof IP Dome (Part II).
Guides on installing Vandal Proof IP Dome (Part III) on ceilings.
Explains the functions of controls like Play, Stop, Microphone, Speaker, Snapshot, File Save, Full Screen, Control Panel, Show System Menu, PTZ Control Panel, I/O Control, LED Control, Alarm Speaker.
Provides important notes and steps for updating camera firmware.
Guides on restoring default settings via the camera's Web interface.
Guides on restoring default settings by interacting directly with the camera's default button.
To Next Page
