Need help?Do you have a question about the GeoVision GV-VS2400 and is the answer not in the manual?
General| Model | GV-VS2400 |
|---|---|
| Video Compression | H.264, MJPEG |
| Operating System | Embedded Linux |
| Video Input Channels | 4 |
| Network Interface | 10/100/1000 Mbps Ethernet |
| Audio Compression | G.711 |
| Audio Input/Output | 1 input, 1 output |
| Ethernet | 1 x 10/100/1000 Mbps |
| Serial Port | RS-485 |
| Alarm Input/Output | 4 in / 1 out |
| Local Storage | 2 x SATA HDD |
| Operating Temperature | 0 ~ 50 °C / 32 ~ 122 °F |
| RAM | 4 GB |
| Storage | 2 x SATA HDD |
Provides basic steps for connecting the GV-Video Server to a network.
Explains how to find the GV-Video Server's IP address using the GeoVision utility.
Guides on assigning a static IP address or configuring network settings via the Web interface.
Steps to access live surveillance images through a Web browser.
Details the controls and functions within the Live View window for real-time video.
Explains the functions accessible via the control panel in the Live View window.
Details how to configure motion detection zones and sensitivity settings.
Configures the system to detect and alert on physical camera tampering.
Provides settings for connecting and controlling PTZ cameras via RS-485 or coaxial.
Configures digital inputs and relay outputs for event triggers and alarms.
Covers advanced settings like DDNS, HTTP/HTTPS ports, streaming, and UPnP.
Manages USB mass storage devices for recording, including formatting and capacity.
Details playback of recorded files via a USB mass storage device.
Explains how to play back recorded files remotely using the ViewLog function.
Guides on retrieving and playing back GPS tracks from recorded video events.
Instructions for updating the GV-Video Server's firmware via Web or utility.
Procedures for backing up and restoring GV-Video Server configurations.
Details on activating and using GPS tracking features with Google Maps.
Instructions to reset the GV-Video Server to its original factory default settings.
Guides on integrating GV-Video Server cameras with GV-DVR/NVR systems.
Instructions for setting up GV-Video Server cameras within the GV-VMS software.
Configuration for connecting to Center V2 for central monitoring.
Configuration for connecting to Vital Sign Monitor for device status.
To Next Page
