Need help?Do you have a question about the GeoVision GV-VS12 and is the answer not in the manual?
Provides basic steps to connect the GV-Video Server to a network.
Details how to find the server's IP address using the utility.
Explains how to assign a static IP or change network settings.
Steps to access live video feeds through a web browser.
Details controls and functions within the live video display.
Configures video settings, motion detection, and privacy masks.
Manages digital inputs, outputs, and PTZ camera controls.
Sets up email, FTP, and CMS notifications for detected events.
Configures network settings, including LAN, wireless, and advanced TCP/IP.
Manages system settings like date/time, user accounts, logs, and firmware.
Steps and configurations to enable video and audio recording.
Methods for playing back recorded video files.
How to play back recordings using a USB drive and Ext2Fsd.
Procedures for updating the server's firmware via web or utility.
Updating firmware through the web interface.
Updating firmware using the dedicated IP Device Utility.
How to back up and restore server configurations.
Procedures to reset the server to its original factory settings.
Lists pin functions for the terminal block on specific models.
Lists pin assignments for the I/O cable with RJ-45 connector.
Detailed specifications for video input, compression, frame rate, and resolution.
To Next Page
General
