Accessing the GV-Video Server
3
3.2.6 Alarm Notification
After input triggers and motion detection, you can be alerted by a pop-up live video and
view up to four captured images.
Captured images
Pop-up live video
Figure 3-7
To configure this function, click the Show System Menu button (No. 11, Figure 3-3), and
select Alarm Notify. This dialog box appears.
Figure 3-8
Motion Notify: Once motion is detected, the captured images are displayed on the
control panel of the Live View window.
I/O Alarm Notify: Once the input device is triggered, the captured images are
displayed on the control panel of the Live View window. For this function to work, the
Administrator needs to install the input device properly. See 4.2.2 Input/Output
Settings.
Alert Sound: Activates the computer alarm on motion and input-triggered detection.
Auto Snapshot: The snapshot of live video is taken every 5 seconds on motion and
input-triggered detection.
File Path: Assigns a file path to save the snapshots.
23
To Next Page
Loading...
Need help?
General
