Administrator Mode
4
4.1 Video and Motion
This section includes the video image settings and introduces how the images can be
managed by using Multicast, Motion Detection, Privacy Mask, Tampering Alarm, Visual
Automation and Video Channel Source Settings.
4.1.1 Multicast
Note this function is available for GV-VS04H (Firmware Version 1.03 or later), GV-VS11,
GV-VS12 (Firmware Version 1.05 or later) and GV-VS14.
The Multicast view allows the GV-Video Server receiving video and audio streams from a
multicast group. It also enables the GV-Video Server to receive audio broadcast from the
hosts in the multicast group.
To join a multicast group and listen to audio broadcasting, it is required to activate the
related settings in 4.7.5 Mulitcast.
Host List
Figure 4-2
Configure Button
1. The host(s), in the multicast group, is displayed automatically on the host list. If you
cannot see any host displayed, click the Configure button, select General Setup, select
Multicast and ensure the relevant IP address, port number and network card are
correctly configured.
33
To Next Page
Loading...
Need help?
General
