GeoVision Inc. 1 Revision Date: 2009/8/25
How to Load Default Settings for GV-Video Server,
GV-Compact DVR or GV-IP Camera
Article ID: GV-15-09-08-24
Release Date: 08/24/2009
Applied to
GV-Video Server (GV-VS02, GV-VS02A, GV-VS04A, GV-VS12)
GV-Compact DVR V1 and V2
GV-IP Camera V1
Summary
Among different models of GV-Video Servers, GV-Compact DVRs and GV-IP Cameras, the
time of loading default settings for each model can vary and the way the LEDs flash can also
be different.
Loading Default Settings for GV-Video Server
(GV-VS02, GV-VS02A and GV-VS04A)
The figure below is the front panel of GV-VS02. Since the front panels of GV-VS02,
GV-VS02A and GV-VS04A are very similar, refer to the figure and the instructions below to
load default values for the three models of GV-Video Servers.
To Next Page
Need help?
General
